• 3 & 4-Way Dies & Holders
Multiple openings can be machined into a single steel bar. These dies are typically used to replace single-vee dies and can significantly reduce die-change time.

NOTE: Unless specified, all three-way dies are furnished with the smallest vee opening at 60 degrees.
1 - 24 of 24 | Results Per Page | View | Unit of Measure
1 
Request Information Compare Items

Item #

Block Size

Number of Vees

Vee Openings

N/A 2.25 in N/A 3 N/A 0.500 in0.750 in1.000 in
N/A 2.75 in N/A 3 N/A 0.750 in1.125 in1.500 in
N/A 3.25 in N/A 3 N/A 1.000 in1.500 in2.000 in
N/A 3.75 in N/A 3 N/A 1.125 in2.000 in2.500 in
N/A 4.25 in N/A 3 N/A 1.000 in2.000 in3.000 in
N/A 4.75 in N/A 3 N/A 1.250 in2.000 in3.000 in
N/A 5.25 in N/A 3 N/A 1.500 in2.500 in3.500 in
N/A 5.75 in N/A 3 N/A 1.500 in2.500 in4.000 in
N/A 6.75 in N/A 3 N/A 1.500 in3.000 in5.000 in
N/A 7.75 in N/A 3 N/A 2.000 in3.500 in6.000 in
N/A 10.00 in N/A 3 N/A 2.500 in4.000 in8.000 in
N/A 12.00 in N/A 3 N/A 3.000 in6.000 in10.000 in
N/A 2.25 in N/A 4 N/A 0.500 in0.750 in1.000 in1.250 in
N/A 2.75 in N/A 4 N/A 0.625 in0.875 in1.125 in1.500 in
N/A 3.25 in N/A 4 N/A 0.750 in1.000 in1.500 in2.000 in
N/A 3.75 in N/A 4 N/A 0.875 in1.125 in2.000 in2.500 in
N/A 4.25 in N/A 4 N/A 1.000 in1.500 in2.000 in3.000 in
N/A 4.75 in N/A 4 N/A 1.000 in1.250 in2.500 in3.000 in
N/A 5.25 in N/A 4 N/A 1.125 in1.500 in3.000 in3.500 in
N/A 5.75 in N/A 4 N/A 1.250 in2.000 in3.000 in4.000 in
N/A 6.75 in N/A 4 N/A 1.500 in2.500 in3.500 in5.000 in
N/A 7.75 in N/A 4 N/A 2.000 in3.000 in3.500 in6.000 in
N/A 10.00 in N/A 4 N/A 2.500 in3.500 in4.000 in8.000 in
N/A 12.00 in N/A 4 N/A 3.000 in4.000 in5.000 in10.000 in
1 - 24 of 24 | Results Per Page | View | Unit of Measure
1 

Fab Supply is the master Distributor of the revolutionary
Rolla-V lower dies and is an excellent source for
light curtains, safety products, shear blades, urethane dies and accessories.