Specifications
Rotor Diameter |
N/A 1 in |
Material Thickness |
N/A 22 to 14 GA0.030 to 0.075 in |
Flange Length |
N/A 7/16 to 2 in |
Bend Types |
N/A
 CB1 Square Bend  CB12 Return Bend  CB13 Large Radius Bend  CB2 Short Leg  CB21 Square Bend, Rod  CB3 Over Square  CB4 Under Square  CB5 Zee Bend  CB6 Open Zee  CB7 Channel Bend  CB8 Hal Bend |
Applications |
N/A
CLAMP: Material is securely clamped without other holddowns. No skidding. Bend: The sheet always stays level. Faster bending with improved safety and consistency. Overbend: Rotor bends beyond 90° to allow for springback. Overbend rotors can bend to 120° in one press stroke. |
For Press Brakes & Punch Press Applications |
N/A
1 MAR-FREE BENDING Most dies can be equipped with Delrin® rotors to bend pre-finished and stainless steels without tool marks. 2 BEND SHORT FLANGES on the ends of large sheets with no part whip-up. Operators run more parts safely with less scrap...even on heavy gauge material. 3 ONE-HIT CHANNEL DIES Adjustable channel die. 4 QUICK CHANGE DIES Anvil sections easily changed in the press for special applications. NOTE: Run different part thicknesses by shimming here. 5 HAT BENDS OR OFFSETS 6 BUILT-IN GAGES or specify clearances for automatic gages. PELICO GAGE SHOWN A) Gage rotates as die closes, spring returns gage each time. B) Gage is adjustable. 7 COMPLETE HEMMING DIES A) Bend part to 120º. B) Flatten to 180º. Let us quote your application Families of parts are often satisfied with one die designed for your needs. |
Fab Supply is the master Distributor of the revolutionary
Rolla-V lower dies and is an excellent source for
light curtains, safety products, shear blades, urethane dies and accessories.
