Rocker dies are designed to produce multi-form shapes such as U channels, edge channels and contour shapes in a single stroke. Rocker dies are typically limited to 16 gauge and lighter material.
Request Information
Unit of Measure
Items
Rocker Dies

Rocker Dies
Rocker Dies

Rocker Dies
Rocker Dies

Rocker Dies
Rocker Dies

Rocker Dies
Rocker Dies

Rocker Dies
Description N/A Flush rocker F175A is used when projected ends would interfere with formed flanges. N/A The F175-F176 knuckle assembly allows for movement of the punch, resulting in better alignment with and release from the bottom die. This assembly can be used with punch profiles F177, F179 and F181. N/A The F177-F178 set forms a U channel in one stroke. Springback allowance is built into the die set. N/A The F179-F180 set produces a square channel in one stroke. If excess material is trapped in the die, some irregularity may be noticed in the bottom of the channel. N/A The F181-F182 set produces a radius bend and return flange in one stroke. This set is not recommended for a radius larger than 1".
Option N/A Flame Hardening

Fab Supply is the master Distributor of the revolutionary
Rolla-V lower dies and is an excellent source for
light curtains, safety products, shear blades, urethane dies and accessories.