| Items |
 F82-F83 Joggle Dies |
 F84-F85 Joggle Dies |
 F86-F87 Joggle Dies |
 F88-F89 Joggle Dies |
 OF1-8 OF1/8 Die |
|||||
| Description | Open-angle offsets up to 5/16" can be produced using the F82-F83 set. Shimming behind reversible blocks changes the depth of the offset. Rotation of the blocks changes the radius. Each corner has a different radius to allow for various material thicknesses. | If the offset is 1" or less from the edge, the F84-F85 set can be used. This die set has a backup leader to minimize spreading, resulting in sharper offsets. | Material-thickness offsets are performed on the F86-F87 set. When necessary, a back-up leader and gauging are provided. | On heavier gauge stock, material-thickness offsets will always be of the open-angle form similar to F88-F89 because the outside radii are too large for the depth of the form. | ||||||
| Net Height | 2-3/4 in | |||||||||
| Clean Up | 1" Bar | |||||||||
| Option | Flame Hardening | |||||||||
|
|
||||||||||
